Heatpress

Why My Heat Press Keeps Turning Off (Heat Press Troubleshooting)

A malfunctioning heat press can be the bane to creating excellent custom-made garments. While there are different problems in unique brands, some of the problems are prevalent in all kinds of heat presses.

Mostly they are related to heating issues, temperature problems, power problems, and frequent short circuits. 

To help you solve these issues, we have crafted a full guide on heat press troubleshooting. Check out the following segments to learn about the troubleshooting methods in detail. 

Troubleshooting 1: Why is My Heat Press Not Heating Up? 

A non-functional heating element is the main reason your heat press isn’t heating up. Either the heating element isn’t activated at all or the heating element has malfunctioned. Apart from the heating element error, there can be other reasons why your heat press is cold. 

Here are the reasons why your heat press is not heating up.

  • Disconnected or faulty wires connected to the heat press platen.
  • Blown fuse in the heat press.
  • Damaged Relay switch or SSR (Solid State Relay).
  • Incorrect temperature settings.
  • Faulty power outlet. 
  • Heat press plugged into a non-functioning power outlet.
  • Overloaded materials on the heat press platen.
  • Damaged heat press settings. 

How to Fix the Heat Press Not Heating Issue?

a guy fixing a heatpress machine

Though there could be many reasons for not heating, it’s quite simple to fix this issue. Just remember to cut off any power connection before opening the heat press. Otherwise, you can injure yourself. 

Here’s a step-by-step guideline for you to identify the core problem and fix it immediately.  

  • Step 1: First, you need to check the connection of the heat press to the power outlet. You can try on other power outlets to test if the outlet is faulty. 
  • Step 2: If the connection is secure, you have to manually reset the heat press using the manufacturer’s guidelines. It will help to restore the original settings.  
  • Step 3: Check the temperature settings of the heat press. Increase the temperature so that the heat press gets hot enough for a press.
temperature settings of the heat press
  • Step 4: In case you notice the heat press still not heating up, it can be the fuse is blown. Check the fuse and replace it immediately.
  • Step 5: Again, frayed wires can be the reason your Vevor heat press is not heating up. In this case, you have to open up the heat press machine by unscrewing the screws on the top. If you notice frayed or disconnected wires, you can fix them by using ring terminals.  
  • Step 6: While opening the heat press, you should also check if the insulation has worn out. Replacing worn-out insulation can get your heat press machine back on track!
  • Step 7: A faulty relay switch is the reason your Cricut heat press is not heating up. The only solution here is to replace the Relay Switch or SSR (Solid State Relay). 

The moment you notice the light on the SSR, this means the relay switch is working. You can also confirm the setup by noticing the temperature rise on the heat press screen. 

  • Step 8: You must check signs of any damage to the heat press sensors. If the heat press sensors are faulty, replace them immediately.
  • Step 9: Remove all the excess machinery connections from the power outlet. 
  • Step 10: Finally, restart the heat press and you’ll notice it’s heating up like it should. 

You can also seek professional guidance from your nearby heat press support if any of the tips don’t work for you.  

Troubleshooting 2: Why My Heat Press Won’t Turn On?

Why My Heat Press Wont Turn On

It’s a serious issue if your heat press doesn’t turn on even after plugging the heat press correctly. This problem usually happens for the following reasons-

  • Melted power cables or wires.
  • Blown fuse
  • Faulty power switch
  • Damaged circuit board

How to Fix the Heat Press Not Turning On Issue?

Why My Heat Press Keeps Turning Off

Going through each heat press component will help solve this problem. Your primary goal should be fixing the power connection-related items. Here’s a small guide if your heat press won’t turn on.

  • Step 1: To begin with, you need to check the power cable. If there’s an overload issue, you’ll notice the power cable has a melted layer on the top. Change the power cable in case the power cable is damaged. 
  • Step 2: Check the power cable’s connection. Tighten any loose connection to make sure the heat press gets enough electricity to start operating.
  • Step 3: Then, you need to check for any signs of frayed wires inside the heat press. Sometimes when the wires don’t receive any power they can’t help the heat press to operate. For frayed wires, attach ring terminals to fix the issue.
  • Step 4: As voltage overload can damage wires and power cables, it can also blow up the safety fuse. This is another sign you should be looking for if the heat press doesn’t work. Replace the fuse with a new one and plug the heat press. You’ll notice your heat press working fine.
  • Step 5: However, sometimes replacing the blown fuse won’t work if the whole circuit board is damaged. If the device is channeling more electricity than usual, the circuit board gets burnt in some areas. 

As a result, it can’t connect the inner components of the heat press. So, in this case, you need to replace the circuit board with the help of the supplier or manufacturer. 

Finally, after replacing and fixing the elements of your heat press, you’ll notice the rocker switch lights up by turning on the switch. Congratulations, you have successfully fixed the heat press power issue!

Troubleshooting 3: Why My Heat Press Keeps Turning Off? 

When there’s a loose wire or faulty cable connection, your heat press keeps turning off. There are also other reasons that are listed together below-

  • Short circuit at the circuit breaker
  • Overloaded circuit
  • Worn out wires
  • Disconnected or loose power cable

How to Fix the Heat Press Turning Off Issue?

By fixing the wires and loose connections, you can fix this problem. But you need to follow each rule in a step-by-step manner. Check out the following guide on how to keep your heat press working.  

  • Step 1: Firstly, you must inspect the power cable connection to the heat press. Check signs for any damage on the cable. Ensure the power cable is properly connected to the heat press.
  • Step 2: If the power cable isn’t the issue, cut off the power supply. Now, you have to check for voltage overload signs. Make sure the power outlet doesn’t have any other device plugged into the outlet. 
  • Step 3: While checking on the power outlet, you should also check if the outlet is damaged. Plug the heat press into a different outlet and see if the heat press operates continuously. 
  • Step 4: Then, open the heat press by unscrewing the bolts. Inspect the circuit breaker thoroughly. A blown-up fuse will indicate the device received more voltage power than it’s supposed to take. Replace the fuse without any second thoughts to revamp your heat press.
  • Step 5: Don’t forget to check the wiring and insulation inside the heat press. Change them if they are damaged by excessive power overload or heat. 

Once you have fixed all of these issues, turn on your heat press again. This time you’ll see the temperature rising in the heat press without shutting off.   

Troubleshooting 4: Why My Heat Press Keeps Tripping Breaker?

Why My Heat Press Keeps Tripping Breaker

Your heat press keeps tripping the breaker because it’s receiving more electricity than its capacity. Here are the major reasons why it’s happening so frequently in your heat press.

  • Damaged temperature sensors
  • Dirty or worn-out heating insulation
  • Broken or frayed wires
  • Faulty circuit breaker
  • Wrong voltage power outlet
  • Ground faults

How to Fix the Heat Press Circuit Breaker Issue?

To fix this issue, you have to check the damages made due to high voltage. Only change the items that started malfunctioning. Here’s a step-by-step guideline on how you can do it. 

  • Step 1: The first thing you have to do is check the voltage of the power outlet. Use a multimeter or voltage tester to identify voltage overload issues. 
  • Step 2: Then, check the power connection to the heat press. Notice if the power switch is blinking or not. Turn off the heat press if it’s working as you’ll operate on the heat press in the next step.
  • Step 3: Shut off all the devices attached to the outlet as well. 
  • Step 4: Now, it’s time to inspect the core components of your heat press. Open the heat press and check any damaged wires or loose connections. 
  • Step 5: After that, change the blown fuse and circuit board. The scratch marks and burnt areas on the circuit board indicate overloaded voltage damage. This is why your circuit breaker is tripping frequently.
  • Step 6: You need to change the heating element as well if it’s completely ruined due to voltage overload. 
  • Step 7: After replacing all the faulty components, screw back the cover of the heat press.
  • Step 8: Set the temperature and pressure settings appropriately.
  • Step 9: Then, ensure proper ventilation around the heat press area. 
  • Step 10: Finally, power up the heat press again. The circuit breaker won’t trip anymore!

However, if you still face any issues, you can contact professionals to look into the matter.

Troubleshooting 5: Why My Heat Press Temperature Fluctuating?

Fix the Heat Press Not Heating Issue

Fluctuating temperatures in a heat press can result in low-quality prints. That’s why it’s important to keep the temperature consistent throughout the operation. Usually, when the heat press temperature is fluctuating, it happens for the following reasons-

  • Blown fuse
  • Malfunctioning heating elements and temperature sensors
  • Short circuit 
  • Damaged wires
  • Overusing the heat press
  • Lack of ventilation

How to Fix the Heat Press Temperature Fluctuation Issue?

By following the steps below, you can ensure a stable temperature while using the heat press.  

  • Step 1: First, you have to disconnect the heat press from the main power source.
  • Step 2: Then, use a screwdriver and an Allen key to open up the heat press.
  • Step 3: Inspect the thermocouple, insulation, and other heating elements. If they are defective, replace them with new components. Check the wires attached to these components if they’re damaged or not. Change the wires as well with the help of a professional.
  • Step 4: If the problem still persists, you need to check the relay switch or solid-state relay. Check for any burns on the switch. Change it and check if the switch is blinking a red light while using the heat press. 

Step 5: Finally, close the lid of the heat press and turn on the power. You’ll notice the heat press is heating up with stable temperatures again!

FAQs

Where Is The Fuse In My Heat Press?

The fuse is in the circuit board in your heat press. 

How Do I Know If My Heat Press Fuse Is Blown?

When you notice the heat press isn’t turning on or heating up, you’ll know your heat press fuse is blown. However, there can be other reasons as well. That’s why, it’s best to confirm a fried fuse by checking the black wire ends of the fuse. 

Conclusion

So, that’s why my heat press keeps turning off. Remember to check the power connections first before you attempt any surgery in the heat press. Most of the parts can be easily replaced with alternatives found in your local shop or online platforms. But if you’re not an expert, it’s better to contact the professionals. 

That’s all for today. Adios!

Mark Brookes

Mark Brookes is a Print Specialist at PrinterJoy. With over a decade of experience, he brings a wealth of knowledge and expertise to his role, providing informative and engaging blog posts for readers.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button